MuxLab 500426 Bedienungsanleitung
Lies die bedienungsanleitung für MuxLab 500426 (2 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu MuxLab 500426 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
© MuxLab Inc. 2018 - -B - -B94 000825 SE 000825
2321 Cohen St, Montreal, QC Canada H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905- 0589
Toll Free (North America): (877) 689- 5228
E-mail: info@muxlab.com URL: www.muxlab.com
Specications
Environment
HDMI 2.0a
Devices
Ultra HD Blu-Ray, projectors, monitors, TV, PC, laptops.
Transmission
Transparent to the user.
Video Bandwidth
18 Gbps
Frequency Range
25 to 600 MHz
Signals
HDMI 2.0a protocol.
HDCP
Revision 1.4 & 2.2 compliant.
Connectors
HDMI receptacle.
Dip Switch
For setting the EDID to be sent to the source (pins: 2, 3 and 4).
( Pin 1 is used to select normal operation and firmware updates via Note: between
the USB service port.)
LEDs
Power: Blue
Input & Output Link: Green
Resolution
480i to 1080p @ 50/60 FPS
1080p @ 24/50/60 FPS
3840 X 2160 @ 24/25/30/60 FPS
Color
8, 10 & 12 bit
Audio
LPCM 7.1CH, Dolby TrueHD, Dolby Atmos, DTS-HD Master
Audio and DTS:X
Cable
HDMI cable of appropriate length for video resolution selected.
Power Supply
One (1) 110-240V/5VDC , 4A power supply
Temperature
Operating: 0° to 40°C Storage: -20° to 60°C
Humidity: up to 90% non-condensing
Enclosure
Metal enclosure
Bracket
Included
Dimensions
9.53” x 3.82” x 1.00” (242 mm x 97 mm x 25 mm)
Weight
3.2 lbs (1.45 Kg)
Compliance
Regulatory: FCC, CE, RoHS
Warranty
2 years
Order Informati on
500427 HDMI 1X8 Splitter, 4K/60 (UPC: 627699004272)
HDMI 1X8 Splitter (500427) , /604K
Quick Installation Guide
Overview
The HDMI 1x8 Splitter (500427) allows one (1) HDMI source to be distributed to
up to eight (8) HDMI displays. The splitter supports up to 4K (3840 X 2160)
video, HDR and HD audio. The splitter is HDCP 1.4 & 2.2 compliant, supports
EDID management and features LED diagnostics. Each output supports an
independent down-scaler from 4K to 1080p, depending on the connected display.
Additionally, all connectors are on the rear panel for neater cabling. Applications
include; commercial and residential AV systems, classroom projector systems,
digital signage, boardroom systems, collaborative PC systems, medical information
systems.
Pre-Installation Check
Identify the connectors as indicated on the product diagram above. LEDs are
located on the front and the connectors and mode switch on the rear.
© MuxLab Inc. 2018
Installation
In order to install the HDMI 1X8 Splitter, please follow the steps below:
1. Connect the HDMI video source to the input HDMI connector of the splitter
with an appropriate HDMI cable.
2. Connect the HDMI display equipment to the output connectors of the splitter
with appropriate HDMI cables.
3. Use the Dip switch to select the EDID that will be sent to the HDMI source
device as indicated on the Dip switch table.
4. Connect the 5 VDC power supply to the splitter rst, and then plug the power
supply into an AC power outlet.
5. Power on the HDMI equipment and verify the image quality.
6. The following diagram shows the nal conguration.
Mode Switch Selection
Use the Dip switch to select the EDID that will be sent to the HDMI source device.
Dip 2
Dip 3
Dip 4
Function
O
O
O
EDID Ultra-HD (3840X2160@60Hz) 7.1 –
Audio
On
O
Off
EDID Ultra-HD (3840X2160@60Hz) 2.0 –
Audio
O
On
O
EDID Ultra-HD (3840X2160@30Hz) 7.1 –
Audio
On
On
O
EDID Ultra- (3840x2160@30Hz) 2.0 HD –
Audio
O
O
On
EDID Full-HD (1080p, 3D, 12bit 7.1 ) –
Audio
On
O
On
EDID Full-HD (1080p, 8bit 2.0 Audio ) –
O
On
On
EDID 1080i 7.1 Audio –
On
On
On
Learn EDID of the device connected to
Output 1 and send it intact to the input port
Note: Dip 1 should be le in the default Oft “ ” position for normal operation.
Firmware Updates: Dip 1 should be set to only when performing rmware “On”
updates. In this case save the included update les from the MuxLab website (rmware
“ ”Bin le & installer software) in the same folder of a PC connected to the 500427 USB
service port Steps: Turn Dip 1 to connect the PC to the USB service port. “On”, 500427 ,
power on the 500 and run the install software The update is performed 427, er .
automatically. Once the update is completed, turn Dip 1 to O for normal operation. re “ff”
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in regard to the installation of the HDMI 1X8 Splitte r.
Picture/
Sound
Probable Cause
Possible Solution
No Image
Wiring
Check continuity
Check correct wiring
No Image
Synchronization
Power o the source and displays, then power them back
on.
Flickering Image
Synchronization
Check HDMI cable length against industry standards.
Choppy Sound
Synchronization
Check HDMI cable length against industry standards.
Noise in image
Weak signal
Check HDMI cable length against industry standards.
Green or pink
hue
HDMI cable
Check HDMI cables and replace as needed.
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877 689 905 058- -5228 (toll-free in North America) or (+1) 514- - 8 (International).
Produktspezifikationen
| Marke: | MuxLab |
| Kategorie: | Empfänger |
| Modell: | 500426 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MuxLab 500426 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger MuxLab
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
29 August 2024
Bedienungsanleitung Empfänger
- Skytec
- Audio-Technica
- Audient
- Medion
- Warm Audio
- Teufel
- Xantech
- JTS
- Megasat
- Monacor
- Pro-Ject
- Esoteric
- CYP
- Atlona
- Ocean Matrix
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025