MuxLab 500718 Bedienungsanleitung
Lies die bedienungsanleitung für MuxLab 500718 (2 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu MuxLab 500718 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
© MuxLab Inc. - 841-A - 841-A94 000 SE 000
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905- 0589
Toll Free (North America): (877) 689- 5228
E-mail: videoease@muxlab.com URL: www.muxlab.com
Specications
Environment
12G-SDI, 6G-SDI, 3G-SDI, HD-SDI & SD-SDI.
Devices
Camera projectors, monitors, TV. ,
Transmission
Transparent to the user.
Detection
Auto Detection of the 12G/6G/3G/HD/SD-SDI Signal.
Bandwidth
11.88bps & 11.88/1.001Gbps
Data Rates
1.485, 2.97, 5.96 & 11.88 Gbps
Output Impedance
75Ω
Signals
SDI protocol.
Supported Resolution
12G-SDI: 2160p50/59.94/60Hz (4:2:2)
6G-SDI: (4:2:2) 2160p23.98/24/25/29.97/30Hz
3G-SDI: 1080p50/59.94/60Hz (4:2:2)
HD-SDI: 1080p/23.98/24/25/29.97/30Hz
720p/50/59.94/60Hz
1080i/50/59.94/60 Hz
SD-SDI: NTSC (59.94Hz), PAL (50Hz)
Audio
Up to 8 Audio Channels.
Ancillary Data
Supported
Input Signal
12G-SDI : SMPTE ST2082
6G-SDI : SMPTE ST2081
3G-SDI: SMPTE , 425M 424M
HD-SDI: SMPTE 292M, 296M
SD-SDI : SMPTE 259M, 344M
Connectors
One (1) BNC Female 75 Ohms, Gold Plated for input.
Six (6) BNC Female 75 Ohms, Gold Plated for outputs.
One (1) Locking Barrel Jack 2.1mm Power Connector.
Note: RG59 coaxial cables not included.
Cable Equalization
12G-SDI up to 150ft (45m)
6G-SDI up to 300ft (90m)
3G-SDI up to 300ft (90m)
HD-SDI up to 500ft (150m)
SD-SDI up to 1000ft (300m)
Cable
RG-59 or better cable required.
Power Supply
One (1) 110-240V/5VDC power supply with interchangeable blades.
Power Consumption
5.0 Watt (Max)
Temperature
Operating: 0° to 40°C Storage: -20° to 60°C
Humidity: Up to 90% non-condensing
Enclosure
Metal
Dimensions
3.1” x 3.3” x 1.2” (79mm x x 84mm 27mm)
Weight
1.7 s (0. kg) lb 78
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
2 years
Order Information
50071 128 G-SDI 1x6 Splitter, 4K/60
12G-SDI 1X6 Splitter, 4K/60
500718
Quick Installation Guide
Overview
The G-SDI 1x6 Splitter, 4K/60 (500 8) allows one (1) 12G/6G/3G/HD/SD-SDI 12 71
source to be distributed and amplied to up to six (6) 12G/6G/3G/HD/SD-SDI displays.
The splitter supports up to 4K (3840 X 2160) video and HD audio, including 480i (SD-
SDI), 720p/1080i (HD-SDI) 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 (12G-SDI), .
The device automatically detects the 12G/6G/3G/HD/SD-SDI signal and -clocks and re
regenerates the signal at the output for extending distances between source and displays.
Additionally, all connectors are on the rear panel for neater cabling.
Applications
Applications include video production, broadcasting, outside broadcasting vehicle, SDI
camcorder, studio- -studio, post production, live events, medical imaging display, to
mobile video.
© MuxLab Inc. 2016
Installation
1. 12 Identify the connectors on the G-SDI 1x6 Splitter as indicated on the
product labels above.
2. 12G Connect the source to the -SDI Input of the splitter.
3. 12G Connect up to six (6) display(s) to the -SDI Outputs of the splitter.
4. Connect the 5 VDC power supply to the splitter rst, and then plug the power
supply into an AC power outlet. If power is present, the blue power LED of
the splitter will be illuminated.
Note: Power ON the G-SDI 1x6 Splitter, 4K/60 only after all connections are 12
made.
5. Power the equipment and verify the image quality.
6. The Sync LED will light up on a detection of a valid signal at the input. The
Data Rate LED will be OFF for an -SDI signal, and ON for all other rateSD s
from HD-SDI to 12G-SDI.
7. The following diagram shows the nal conguration.
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
with respect to the installation of the G-SDI 1x6 Splitter, 4K/60: 12
Symptom
Probable
Cause
Possible
Solutions
No Image
No power
• Check power connections
No Image
Source
• Check if the source is sending a signal.
No Image
Resolution
• Check if the source resolution is valid.
No Image
Coaxial Cable
• Check the coaxial cable.
No Image
Coaxial Cable distance
• Check the coaxial cable distance for the corresponding
resolution (see Specications table).
No Image
Coaxial Cable Quality
• Check the coaxial cable type. It should be an RG-59 or better
coaxial cable.
Flickering
Image
Synchronization
• Check the coaxial Cable Quality or distance.
Choppy sound
Synchronization
• Check the coaxial Cable Quality or distance.
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877 689 905- -5228 (toll-free in North America) or (+1) 514- -0588 (International).
Produktspezifikationen
| Marke: | MuxLab |
| Kategorie: | Empfänger |
| Modell: | 500718 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MuxLab 500718 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger MuxLab
21 Juni 2025
21 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
29 August 2024
Bedienungsanleitung Empfänger
- DAP
- AudioSource
- Ebode
- Xsarius
- WesAudio
- Brondi
- Homecast
- KanexPro
- Medion
- Musway
- Tronics
- AVPro Edge
- Legamaster
- Vision
- Mark Levinson
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025