Proaim P-OHCR-01 Bedienungsanleitung

Proaim Stativ P-OHCR-01

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Proaim P-OHCR-01 (5 Seiten) in der Kategorie Stativ. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 4.4 Sternen bewertet

Seite 1/5
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Clip on Overhead Rig for DSLR Video -
Camera Setups (P- -OHCR 01)
A s s e m b l y M a n u a l
Rails
2 x Track Clamps 1 x Camera Mounîžźng Plate
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wriîžźng by the Publisher.
2
• Loosen the track clamp's knob and mount it
by inserîžźng it into the baby pin.
Clip on Overhead Rig -Setup
• Insert the track clamp into the baby pin and
îžźghten it properly with the help of a knob.
• Straighten the rails by opening them
manually.
• By pressing the pin, join the rails together.
• Aer joining the rails, it will be properly
straightened.
• Loosen both the knobs of the track clamp.
3
• Insert the rail on to the top part of the track
clamp.
• Secure by ghtening both the knobs together.
• Loosen the 4 knobs of the camera mounng
plate.
• Loosen the mounng plate.
• Then properly insert the rail in the camera
mounîžźng plate, As shown in the image.
• Tighten the 4 knobs of the camera mounng
plate properly and insert it into the second
track clamp.


Produktspezifikationen

Marke: Proaim
Kategorie: Stativ
Modell: P-OHCR-01

Brauchst du Hilfe?

Wenn Sie Hilfe mit Proaim P-OHCR-01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten