Regina Andrew Dion 17-1039 Bedienungsanleitung

Lies die bedienungsanleitung für Regina Andrew Dion 17-1039 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 5 Bewertungen. Hast du eine Frage zu Regina Andrew Dion 17-1039 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Figure 1

ITEM NO:

ITEM NO:

ITEM NO:

ITEM NO:ITEM NO:-

-

-

--39

39

39

39 39

17

17

17

171710

10

10

1010

Dion Outdoor Sconc

Dion Outdoor Sconc

Dion Outdoor Sconc

Dion Outdoor SconcDion Outdoor Sconce

e

e

e e

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.

ELECTRICIAN.

ELECTRICIAN.

ELECTRICIAN. ELECTRICIAN.

These instructions are provided for your safety. It is very important that they are read completely before

beginning the installation of your fixture.

ASSEMBLY INSTRUC

ASSEMBLY INSTRUC

ASSEMBLY INSTRUC

ASSEMBLY INSTRUCASSEMBLY INSTRUCT

T

T

TTION:

ION:

ION:

ION:ION:

A. FOR WIRING DIRECTLY INTO OUTLET BOX (Figure 1)

1. Remove steel retainer from lamp back plate by removing the attachment knurled

knobs on the front of the backplate and attach the retainer to the outlet (junction)

box. Adjust the retainer so that the tabs on the side are level.

2. Connect the wires of lamp to the wires of outlet box; a. black outlet--wire to box

black or smooth lamp wire; b. white outlet--wire to black or smooth lamp wire; box

c. bare “grounding” outlet--wire to green wire. box

3. Install lamp to the steel retainer using two knurled knobs.

B. SHADE ASSEMBLY (Figure 2)

1. Insert appropriately rated bulb (bulb included) into the socket. Put the glass shade

onto the socket cup and screw on to tighten.

MOUNTING FIXTURE(S) OUTDOOR AND/OR IN A WET LOCATION INSTRUCTION (Figure 3)

1. Mounting surface should be clean, dry, flat and ¼” larger than the canopy/fixture base

on all sides. Any gaps larger than 3/16” should be corrected.

2. With a silicone caulking compound (not included), caulk completely around where the

back of the canopy/back plate meets the wall surface.

CAUTION:

CAUTION:

CAUTION:

CAUTION: CAUTION: FAILURE TO COMPLETELY CAULK AROUND THE LIGHT FIXTURE’S MOUNTING

PLATE COULD RESULT IN WATER SEEPAGE INTO THE LIGHT FIXTURE AND/OR JUNCTION

BOX.

Made in China

Made in China

Made in China

Made in ChinaMade in China

Produktspezifikationen