Regina Andrew Happy 17-1033 Bedienungsanleitung

Lies die bedienungsanleitung für Regina Andrew Happy 17-1033 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Regina Andrew Happy 17-1033 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Figure 1

ITEM NO:

ITEM NO:

ITEM NO:

ITEM NO:ITEM NO:-

-

-

--33

33

33

33 33

17

17

17

171710

10

10

1010

Happy Outdoor Sconc

Happy Outdoor Sconc

Happy Outdoor Sconc

Happy Outdoor SconcHappy Outdoor Sconce

e

e

e e

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRI

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRI

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRI

WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRIWE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.

CIAN.

CIAN.

CIAN. CIAN.

These instructions are provided for your safety. It is very important that they are read completely before

beginning the installation of your fixture.

ASSEMBLY INSTRUC

ASSEMBLY INSTRUC

ASSEMBLY INSTRUC

ASSEMBLY INSTRUCASSEMBLY INSTRUCT

T

T

TTION:

ION:

ION:

ION:ION:

A. FOR WIRING DIRECTLY INTO OUTLET BOX (Figure 1)

1. Remove steel retainer from lamp back plate by removing the attachment screws

on the side of the backplate and attach the retainer to the outlet (junction) box.

Adjust the retainer so that the tabs on the side are level.

2.box Connect the wires of lamp to the wires of outlet box; a. black outlet--wire to

black or smooth lamp wire; b. white outlet--wire to black or smooth lamp wire; box

c. bare “grounding” outlet--wire to green wire. box

3. Install lamp to the steel retainer using three at-screws. head

B. SHADE ASSEMBLY (Figure 2)

1. Insert appropriately rated bulbs (bulbs included) into the sockets. Put the glass

shades onto the socket cups and screw on tighten. to

MOUNTING FIXTURE(S) OUTDOOR AND/OR IN A WET LOCATION INSTRUCTION (Figure 3)

1. Mounting surface should be clean, dry, flat and ¼” larger than the canopy/fixture base

on all sides. Any gaps larger than 3/16” should be corrected.

2. With a silicone caulking compound (not included), caulk completely around where the

back of the canopy/back plate meets the wall surface.

CAUTION:

CAUTION:

CAUTION:

CAUTION: CAUTION: FAILURE TO COMPLETELY CAULK AROUND THE LIGHT FIXTURE’S MOUNTING

PLATE COULD RESULT IN WATER SEEPAGE INTO THE LIGHT FIXTURE AND/OR JUNCTION

BOX.

Made in China

Made in China

Made in China

Made in ChinaMade in China

Figure 2

Produktspezifikationen