TP-Link ER605 v2 Bedienungsanleitung

TP-Link Router ER605 v2

Lies die bedienungsanleitung für TP-Link ER605 v2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 10 Bewertungen. Hast du eine Frage zu TP-Link ER605 v2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

Installation Guide

LED Explanation

Connection

Conguration

ER605

Modem

Internet

On: Power on

O: Power o

Power/PWR

Flashing: System running normally

On/O: System running abnormally

System/SYS

Note: For simplicity, we take ER605 as an example throughout this Guide.

Omada Gigabit VPN Router

Option 1: Standalone Mode

Open a web browser and type the default management address

192.168.0.1 in the address eld of the browser, then press the Enter key.

Connect a computer to a LAN port of the router with an RJ45 cable

properly. If your computer is congured with a xed IP, change it to Obtain

an IP address automatically.

1. For detailed congurations, refer to the User Guide of the router. The guide

can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Create a username and a password for subsequent login attempts and

for security.

Use the username and password set above to log in to the webpage.4.

After a successful login, you can congure the function by clicking the

setup menu on the left side of the screen.

Link/Act and 1000Mbps (for ER7206)

The router supports two conguration options:

Standalone Mode: Congure and manage the router singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: Use the charger provided in the

package to power on the router.

On: Connecting to a device and running at 1000 Mbps

O: No device connected/connecting to a device but not running at 1000 Mbps

On: Connecting to a device but no activity

O: No device connected to the corresponding port

Flashing: Transmitting or receiving data

Router PC

In Standalone Mode, use a computer to congure and manage the router.

Link/Act (for ER605) | SFP WAN (for ER7206)

On: Connecting to a device but no activity

O: No device connected to the corresponding port

Flashing: Transmitting or receiving data

Note: When the router is managed by a controller, congurations of the router will be overriden by the controller.

USB (for ER605)

On: Connecting to a USB device

O: No USB device connected

Flashing: Identifying the connected device

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Adapter shall be installed near the equipment and shall be easily accessible.

Place the device with its bottom surface downward.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and

Electrical Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at

https://www.tp-link.com/support/ukca/

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC,

2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/support/ce/.

EU Declaration of Conformity

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides, welcome

to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com to join TP-Link

Community.

Option 2: Controller Mode

Switch

Router

EAP

Clients

Omada Hardware Controller

(OC200/OC300)

EAP EAP

Type1: Via Omada Hardware Controller (OC200/OC300)

Switch

Router

EAP

Clients

Controller

Omada Software Controller

running on the Host PC

EAP EAP

Omada Cloud Portal

4. (For Remote Management) You can remotely access and manage your

controller via Omada Cloud Service.

3. After the quick setup, the login page appears. Enter the username and

password you have created and click . Then you can further Log in

configure the controller.

2. On the Omada Controller’s web page, follow the wizard to complete the

quick setup.

1. As Omada Hardware Controller gets its IP address from the DHCP server of

the router, we don’t know its IP address explicitly. However, we can nd it out

on the router’s DHCP client list.

a. Make sure that Cloud Access is enabled on your controller. By default, Cloud

Access is enabled. Make sure that the Cloud LED is flashing slowly.

b. Launch a web browser and enter https://omada.tplinkcloud.com in the address

bar. Enter your TP-Link ID and password to log in. Click + Add Controller and

choose Hardware Controller to add your controller. Then you can further

configure the controller.

a. You need rst nd the IP address of the router. Open the command line on your

PC and enter ipconfig. In the result list, find the Default Gateway, which is also the

IP address of the router.

b. Launch a web browser and enter the IP address of the router. Create a username

and password, and log into the router’s web page. Then go to Network > LAN >

DHCP Client List to find the IP address of your controller according to its MAC

address.

c. Enter the IP address of your controller in the address bar to open its web page.

1. On the PC with Windows OS or Linux OS, download the Omada Software

Controller installation file from

https://www.tp-link.com/support/download/omada-software-controller/.

2. Run the file and follow the wizard to install the Omada Software Controller.

3. Launch the Omada Software Controller and follow the step-by-step

instructions to complete the Quick Setup. After the wizard is finished, a

4. Enter the username and password you created and click Log in. Then you

can further configure the network.

a. Enable Cloud Access on the setting page on the controller and bind a TP-Link ID

to your controller. If you have configured this in the setup wizard, skip the step.

b. Launch a web browser and enter https://omada.tplinkcloud.com in the address

bar.

c. Enter your TP-Link ID and password to log in. A list of controllers that have been

bound with your TP-Link ID will appear. Then you can click Launch to further

configure the controller.

After installing Omada Software Controller, you can remotely access the

controller through Omada Cloud Portal. Follow the steps below.

For the detailed congurations, refer to the User Guide of the controller. The

guide can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Choose from the following two types of Omada Controller:

Type2: Via Omada Software Controller

With Omada App, you can also

manage your controller at a

local site or a remote site via

your mobile device. Scan for Omada App Omada App

Omada App

Note: To download Omada Software Controller successfully, it is recommended to

configure the router’s network to access the internet. Refer to Standalone Mode to

launch the management page and go to > to complete the Network WAN

configuration.

Omada Hardware Controller (OC200/OC300) is a good alternative if you have no spare PC to keep

running Omada Software Controller in the network. It needs to be purchased additionally.

For more details, refer to the Installation Guide of OC200/OC300.

Omada Software Controller is a free software for centralized management. To centrally manage

your devices, Omada Software Controller needs to keep running on your computer.

UK Declaration of Conformity

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Router
Modell:	ER605 v2
Breite:	158 mm
Tiefe:	101 mm
Mitgelieferte Kabel:	AC
Produktfarbe:	Schwarz
Höhe:	25 mm
Energiequelle:	AC
AC Eingangsspannung:	120 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Verpackungsbreite:	190 mm
Verpackungstiefe:	254 mm
Verpackungshöhe:	60 mm
Paketgewicht:	650 g
Netzstandard:	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Unterstützte Sicherheitsalgorithmen:	3DES, 128-bit AES, 192-bit AES, 256-bit AES, DES, MD5, SHA-1
Unterstützte Netzwerkprotokolle:	TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP, DNS, IPsec, PPTP, L2TP
Schnellstartübersicht:	Ja
Zertifizierung:	CE, FCC, RoHS
Stromverbrauch (Standardbetrieb):	7.94 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	5
Betriebsanleitung:	Ja
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	Activity, LAN, System, USB, WAN
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Unterstützt Windows-Betriebssysteme:	Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows 98SE, Windows NT, Windows Vista, Windows XP
Rack-Einbau:	Ja
Unterstützt Mac-Betriebssysteme:	MacOS
Anzahl der USB-Anschlüsse:	1
Web-basiertes Management:	Ja
VLAN-Unterstützung:	Ja
Management-Protokolle:	Telnet
Speicherkapazität:	256 MB
Schnellinstallationsanleitung:	Ja
Interner Speichertyp:	DRAM
Ethernet Schnittstellen Typ:	Gigabit Ethernet
Nachhaltigkeitszertifikate:	RoHS
Unterstützte Protokolle:	IPsec/PPTP/L2TP
Ethernet-WAN:	Ja
DSL-WAN:	Nein
SIM-Karten-Slot:	Nein
3G/4G USB Modem-Kompatibilität:	Nein
Verkabelungstechnologie:	10/100/1000Base-T(X)
DMZ-Unterstützung:	Ja
Firewall:	Ja
DoS Attacken Prävention:	Ja
DHCP-Client:	Ja
DHCP-Server:	Ja
Universal Plug and Play (UPnP):	Ja
Reset-Knopf:	Ja
Unterstützte Linux-Betriebssysteme:	Ja
Flash-Speicher:	128 MB
Systemereignisprotokoll:	Ja
URL-Filterung:	Ja
NEtzwerkadressenübersetzung (NAT):	Ja
Anzahl VPN-Tunnels:	20
Router Protokoll:	RIP-1, RIP-2
Rack-Kapazität:	1U
NAT Funktionalität:	• One-to-One NAT\n• Multi-Net NAT\n• Virtual Server\n• Port Triggering\n• NAT-DMZ\n• FTP/H.323/SIP/IPSec/PPTP ALG, UPnP
ARP-Angriffsverhütung:	Ja
Authentisierung Methode:	SHA-1, MD5
Gleichzeitige Verbindungen:	150000
Richtlinienbasiertes Routing:	Ja
Verkehrssteuerung:	Ja