Vaxcel PD5027 Bedienungsanleitung
Vaxcel
Beleuchtung
PD5027
Lies die bedienungsanleitung für Vaxcel PD5027 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 9 Bewertungen. Hast du eine Frage zu Vaxcel PD5027 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save this instruction.
PD5027BN / PD5027OBB
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
1. Unscrew the set screws from the bar, and attach the canopy
and the mounting plate to the ceiling:
a. If the ceiling material is concrete:
Aim the middle hole of the mounting plate at the center of
the outlet box. Mark the two setting holes of the mounting
plate on the ceiling, drill these two marks, and then thread
the wall anchors into the two holes of the ceiling. Thread
the wires of the power source through the canopy and
the mounting plate. Attach the canopy and the mounting
plate to the ceiling by threading the drywall screws (B)
through the setting holes of the mounting plate into
th wall anchors (A).
b. If the ceiling material is wooden:
Thread the wires of the power source through the
canopy and the mounting plate. Attach the canopy and
the mounting plate to the ceiling by threading the drywall
screws (B) through the setting holes of the mounting plate
into the ceiling.
c. If the ceiling material is sheetrock:
Thread the wires of the power source through the canopy
and the mounting plate. Attach the canopy and the
mounting plate to the ceiling by threading the small
steel nails (not supplied) through the setting holes of
the mounting plate into the ceiling.
2. Take the proper numbers of the rods from three single
pendants which just be dismantled to install.
Rod connections:
a. Thread the fixture wire from the glass holder through the down rod, and secure the down rod to the glass holder.
b. Thread the fixture wire from the down tube through the middle rod and secure the middle rod with the threaded
pipe.
c. Thread the fixture wire through the upper rod, and then secure the upper rod with the threaded pipe.
d. Thread the fixture wire through the set threaded pipe of the bar and secure the upper rod to the bar.
e. Complete the same steps for the other glass holders and rods.
* The height can be adjustable by adding or reducing one or two rod from upper rods and middle rods.
Upper Rod
Threaded Pipe
Set Threaded Pipe
Threaded Pipe
Glass Shade
Socket Ring
Threaded Pipe
Glass Holder
Middle Rod
Down Rod
Fixture Wire
Bar
Canopy
Wire Connector
(C)
House Ground Wire
Fixture Ground Wire
Outlet Box
Set Screw
Drywall Screw
(B)
Green Ground Screw
Mounting Plate
Anchor
(A)
Setting Hole
Max. 100W Medium Base bulb
(not included)
Turn off the power at fuse or circuit box.
Installation Steps
Hardware Package (included):
Anchor (A)
Drywall Screw (B)
Wire Connector (C)
Page 1 / 2
230410
Produktspezifikationen
| Marke: | Vaxcel |
| Kategorie: | Beleuchtung |
| Modell: | PD5027 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vaxcel PD5027 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Vaxcel
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
Bedienungsanleitung Beleuchtung
- Metalux
- Fabas
- Sun Joe
- Deko-Light
- Klarstein
- BB&S
- Aladdin
- Nemco
- Livoo
- ActiveJet
- Osram
- DeSisti
- Fun Generation
- Max
- Martin
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026