APC BX1000M Bedienungsanleitung


Lies die bedienungsanleitung für APC BX1000M (10 Seiten) kostenlos online; sie gehört zur Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu APC BX1000M oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/10
Safety and General Information
Inspect the package contents upon receipt. Notify the carrier and
dealer if there is any damage.
SAVE THESE INSTRUCTIONS - This section contains important
instructions that should be followed during installation and maintenance
of the UPS and batteries.
Inventory
Connect the Battery
The UPS is shipped with the battery disconnected.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
This UPS is intended for indoor use only.
Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive
dust or humidity.
Connect the UPS power cable directly to a wall outlet.
Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.
Failure to follow these instructions will result in death or serious injury.
Remove the battery door.
Remove the battery. Connect the wire.
bu001b
b
u
0
2
4
c
bu025c
User Manual Back-UPS
Pro
BX850/1000/1350/1500M/M-LM60


Produktspezifikationen

Marke: APC
Kategorie: Unterbrechungsfreies Stromversorgungssystem
Modell: BX1000M
Breite: 91 mm
Tiefe: 310 mm
Gewicht: 7200 g
Produktfarbe: Schwarz
Akkuladezeit: 12 h
Akku-/Batterietechnologie: Plombierte Bleisäure (VRLA)
Höhe: 190 mm
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 0 - 95 %
Verpackungsbreite: 142 mm
Verpackungstiefe: 442 mm
Verpackungshöhe: 253 mm
Paketgewicht: 8000 g
Zertifizierung: California (CEC) Battery Charger, FCC Part 15 Class B, UL 1778
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 1
Kabellänge: 1.83 m
Temperaturbereich bei Lagerung: -15 - 45 °C
Luftfeuchtigkeit bei Lagerung: 0 - 95 %
Batterielebensdauer (max.): 5 Jahr(e)
Formfaktor: Tower
Serielle Schnittstelle: RJ-45
Ausgangsleistung: 600 W
Nachhaltigkeitszertifikate: RoHS, ENERGY STAR
Verkabelungstechnologie: 10/100/1000Base-T(X)
Eingangsfrequenz: 60 Hz
Anzahl der AC-Ausgänge: 8 AC-Ausgänge
USV-Topologie: Line-Interaktiv
Eingangs-Betriebsspannung (min): 88 V
Eingangs-Betriebsspannung (max): 139 V
Ausgangskapazität: 1 kVA
Ausgangs-Betriebsspannung (min): - V
Ausgangs-Betriebsspannung (max): 120 V
AC-Steckertypen: NEMA 5–15R
Wellenform: Sine
Stromstärke (maximal): 12 A
Regulierung der Ausgangsfrequenz: 60 Hz
Anstieg der Energiemenge: 1103 J

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC BX1000M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten