Scanstrut SC-CW-2GT Bedienungsanleitung


Lies die bedienungsanleitung für Scanstrut SC-CW-2GT (2 Seiten) kostenlos online; sie gehört zur Kategorie Handyladegerät. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 15 Bewertungen. Hast du eine Frage zu Scanstrut SC-CW-2GT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
WATERPROOF WIRELESS CHARGER
SURFACE 3 COIL 15W SC-CW-2GT
22-08-2024 (Rev B)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
+1 860 308 1416
UK & International
+44 (0)1392531280
Part List
Surface 3 Coil x1
Tools Required
Jig Saw File
ø ø6mm (0.24") 10mm (0.39")
Technical
IP Waterproof Rating IPX6 Front and back
Input voltage 10-30V DC (12/24V System)
Input current max 2A
Output power max 15W (12V 1.25A)
Standby power max <1.2W
Certication
CE, UKCA, FCC, ROHS, C-Tick, UN ECE
R10, E24, PSE Certied
1
Cut out template
Mark the cutting boundary
Use template to
Drill 4x
ø6mm (0.24")
Drill 4x 10mm (0.39")ø
2
Jig saw inside of the cutting
boundary. DO NOT exceed the
boundary area.
File the cut out area to the
boundary prole unitl the
product ts.
3
Clean mounting surface.
Remove self-adhesive backing.
Feed cable through hole.
Apply pressure on top of
charger to secure.
Connect wires or connectors
to 12/24V supply, ensuring a
waterproof connection.
Fuse according to input
voltage and current.
4
READ THE IMPORTANT SAFETY INFORMATION
LEAFLET BEFORE INSTALLING.
White LED Constant: ON Charge
Red LED Constant: Standby (power ON)
Red LED Flashing:
Foreign object detection: metallic object placed on top that is not
Qi compatible.
OR
Thermal cutout: The internal temperature is too high/ low. Wait
for product to return to operating temperature.


Produktspezifikationen

Marke: Scanstrut
Kategorie: Handyladegerät
Modell: SC-CW-2GT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scanstrut SC-CW-2GT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten